Neler yeni

Uydu Max Sat

Yeni mesajlar Yeni konular En çok cevaplanan En görüntülenen konu En çok begenilen

❖❖E2 PLUGİNS❖❖ [*E2]Sat-Universe Feeds Plugin [*.Feeds]

RasheDaD®

Co Admin
Yetkili üye
Katılım
10 Eylül 2018
Mesajlar
8,883
Beğeniler
1,739
Puanlar
113
#2
[*E2]Sat-Universe Feeds Plugin [*.Feeds]

Sat-Universe Feeds Plugin(BissFeedAutoKey )


Sat-Universe Feeds Plugin
BissFeedAutoKey Plugin
A Plugin For Feed-Lovers NOT Feed-Hunters
Description:

I've written this plugin based on feeds that are reported in sat-universe. After the feed freq is scanned and searched, user can use this plugin. when plugin is up, it shows all feed info that is reported in sat-universe like transponder,id,CW, 4:2:2 or 4:2:0, sport category ,game and somethings else and if you press OK button, The #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically if your plugin setting is ok, otherwise user should should restart your softcam manually.

Option and Tips:
1- when plugin is up, five event maybe happen:

a)All thing is ok and all info are shown and visible.

b)HTTP error is happened and infos aren't shown

c)URL error((e.g. connection refused)) is happened and infos aren't shown.

d)Socket error is happened and infos aren't shown.

e)Internet Conection error is happened and infos aren't shown.

2)When all thing is ok and all infos are visible(especially #CW):

a)First of all, check plugin setting. Press Blue button and following screen will be displayed:



Important Tips Before using Plugin:
1. Config folder -> oscam.conf file -> [webif] section -> httpport = 8888

2. Config folder -> oscam.conf file -> [webif] section -> "127.0.0.1" must be in httpallowed section like(httpallowed = 127.0.0.1,192,168.0.0-192.168.255.255)



3.In setting screen, you should select folder of Softcam.key file(Default Folder: etc/tuxbox/config) and press ok button to save changes!

b)Finally go back to plugin and press OK button to add #CW key in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically. Otherwise you should restart your softcam manually.

3- when user press ok button, several event maybe happen:
a) all thing is ok and following message will be displayed: "SoftCam.Key Updated & SoftCam is Restarting ...!"
b) IP:PORT is wrong and following message will be displayed: "SoftCam.Key Updated. Please Restart SoftCam "
c)Softcam.key file folder is wrong and following message will be displayed: "SoftCam.Key File Not Found! Please Set Directory in Setting(BlueKey)"
d)CW NOT FOUND - Reasons:1- All type of Internet Conection errors 2-Feed isn't reported in Sat-universe 3-Server of our plugin and Feed info isn't updated.
e) Signal isn't locked: "No Signal"
f) Not Biss Feed or Channel: "Not Biss Encrypted"

4-Plugin delete keys that inserted by this plugin every 12 hours!

5-If CW doesn't find, a screen will be displayed that request only the CW code of feed or any Biss Encrypted channel! After pressing ok button, key will be inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically.
when you type CW in box, lowercase or uppercase letters is not important.
Some #CW keys of tv channels are existed, if you want to add your favorite Biss channels, please post full info of it in this thread.(minimum info: Full transponder and #CW)

Error log:
We test this plugin only in Enigma2 Receivers and fix all plugin errors but If when plugin is up and your enigma2 is crashed, please sent error log.

Special Thanks:
Special Thanks To: Sat-Universe Feed Hunters
Special Thanks To: All who help and support me[Shr776, HamidReza, hamid soltani, ali(@ali_ak11), ahmad(@dm920uhd)]
Special Thanks To: oscam-emu(oscam.emu@gmail.com)
Special Thanks To: Ihad.tv enigma2-plugin tutorial 2010 lessons by Emanuel

Dwonload: BissFeedAutoKey


Screen Shots:




__________________
Sat-Universe Feeds Plugin
BissFeedAutoKey Plugin
A Plugin For Feed-Lovers NOT Feed-Hunters

http://www.sat-universe.com/showthread.php?p=2037005277
 
Katılım
4 Nisan 2019
Mesajlar
237
Beğeniler
19
Puanlar
18
#10
konu birden popüler oldu
nedendir bilemiyorum köyeler hep önde
acaba parasal bir sisteme çekmemi olacak
bakalım görücez ileride
 

RasheDaD®

Co Admin
Yetkili üye
Katılım
10 Eylül 2018
Mesajlar
8,883
Beğeniler
1,739
Puanlar
113
#12
BissFeedAutoKey Plugin By momi133

A Plugin For Feed-Lovers NOT Feed-Hunters

Description:

I've written this plugin based on feeds that are reported in sat-universe. After the feed freq is scanned and searched, user can use this plugin. when plugin is up, it shows all feed info that is reported in sat-universe like transponder,id,CW, 4:2:2 or 4:2:0, sport category ,game and somethings else and if you press OK button, The #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically if your plugin setting is ok, otherwise user should should restart your softcam manually.


Remote Control Button Help:

OK & Green : #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically

BLUE & Yellow: Show Setting Screen

RED & EXIT: EXIT PLUGIN


Option and Tips:

First of all, check plugin setting. Press Blue button and following screen will be displayed:




1. Config folder -> oscam.conf file -> [webif] section -> httpport = 8888

2. Config folder -> oscam.conf file -> [webif] section -> "127.0.0.1" must be in httpallowed section like(httpallowed = 127.0.0.1,192,168.0.0-192.168.255.255)


3- Please disable username and password in webif setting


4- After config file setting was changed, softcam must be restarted manually to applying changes.



4.In setting screen, you should select folder of Softcam.key file(Default Folder: etc/tuxbox/config) and press ok button to save changes!

>>>Plugin delete keys that inserted by this plugin every 6 hours!

>>> If #CW not found by plugin, a screen will be displayed that request the CW code of feed or any Biss Encrypted channel!

After pressing ok button, key will be inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically.

>>>when you type CW in box, lowercase or uppercase letters is not important.

>>>Some #CW keys of tv channels are existed, if you want to add your favorite Biss channels, please post full info of it in this thread.(minimum info: Full transponder and #CW)
Important Tip: In some Countries, user must use VPN to see #CW

:announcement1::announcement:Important Tip: In some Countries, user must use VPN to see #CW :announcement::announcement1:







autoroll
biss autoroll
Enigma2
Plugin
enigma2 softcam plugin
biss
BissFeedAutoKey

Additional Authors

momi133

More Files by master G

E2iStream
master G 15 minutes ago
SatVenus Panel Enigma2 Plugin ~ Addon's for your image
master G Feb 21st 2019
Likra Enigma2 Settings
master G Apr 11th 2019
E-Channelizer
master G Feb 7th 2019
FreeServer Enigma2 Plugin
master G Feb 28th 2019
Also users test powervu autoroll for AFN and Astra 4.8E channels and sent oscam-emu logs. logs show that channels are discrypted under 15 secs for AFN and mote time for Astra 4.8E channels! So, it seems that adding powervu keys to server is not necessary Now! it Maybe added to plugin in future!


Tip: 1- install latest version of oscam-emu or oscam or others

2- Please read following page for powervu channels!

https://github.com/oscam-emu/oscam-p...PowerVU-config


B. Edit the global OSCam configuration with one of these ways:

Add the 0E00:000000 string in the Skip CWs checksum test only for option under the global config settings.
Add the disablecrccws_only_for = 0E00:000000 directive in the oscam.conf file under the global section.

Code

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:00000 0;0E00:000000;1010:000000;1801:000000,001101,00211 1,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000


Biss Feed Auto Key Plugin

Download


https://www.sendspace.com/file/cm5mdj
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
Katılım
17 Ağustos 2018
Mesajlar
33,998
Beğeniler
621
Puanlar
113
Konum
Bursa
İnternet sitesi
www.uydumaxsat.com
#14
VU+New BissFeedAutoKey New update 1.5 Plugin By momi133

A Plugin For Feed-Lovers NOT Feed-Hunters New update 1.5

--Plugin search Softcam.key directory and it's added to setting directories!

--If No softcam.key in STB, Plugin will show a massage in setting!

--Fix picon of satellite

--if user and pass are defined in webif setting, a warning massage will be appeared.

--Animated Channel name, sat and freq

--Fix some bugs


Next update:

In next version, we will try to improve search in database by plugin!

Also we will try to add keyboard to plugin for Manual mode

Download

https://www.sendspace.com/file/kufi9c
 

RasheDaD®

Co Admin
Yetkili üye
Katılım
10 Eylül 2018
Mesajlar
8,883
Beğeniler
1,739
Puanlar
113
#16
bissfeed-autokey-20190603-r1.5-momi133.rar.html


Biss Feed AutoKey Plugin 1.5

- 03.06.2019

--Plugin search Softcam.key directory and it's added to setting directories! --If No softcam.key in STB, Plugin will show a massage in setting! --Fix picon of satellite --if user and pass are defined in webif setting, a warning massage will be appeared. --Animated Channel name, sat and freq --Fix some bugs - Next update: In next version, we will try to improve search in database by plugin! Also we will try to add keyboard to plugin for Manual mode

04.06.2019 00:26
 

RasheDaD®

Co Admin
Yetkili üye
Katılım
10 Eylül 2018
Mesajlar
8,883
Beğeniler
1,739
Puanlar
113
#20
BissFeedAutoKey Plugin By momi133

A Plugin For Feed-Lovers NOT Feed-Hunters

Description:

I've written this plugin based on feeds that are reported in sat-universe. After the feed freq is scanned and searched, user can use this plugin. when plugin is up, it shows all feed info that is reported in sat-universe like transponder,id,CW, 4:2:2 or 4:2:0, sport category ,game and somethings else and if you press OK button, The #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically if your plugin setting is ok, otherwise user should should restart your softcam manually.


Remote Control Button Help:

OK & Green : #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically

BLUE & Yellow: Show Setting Screen

RED & EXIT: EXIT PLUGIN


Option and Tips:

First of all, check plugin setting. Press Blue button and following screen will be displayed:




1. Config folder -> oscam.conf file -> [webif] section -> httpport = 8888

2. Config folder -> oscam.conf file -> [webif] section -> "127.0.0.1" must be in httpallowed section like(httpallowed = 127.0.0.1,192,168.0.0-192.168.255.255)


3- Please disable username and password in webif setting


>>> Please use following config: thanks levi45 oscam.conf


4- After config file setting was changed, softcam must be restarted manually to applying changes.



5.In setting screen, you should select folder of Softcam.key file(Default Folder: etc/tuxbox/config) and press ok button to save changes!

>>>Plugin delete keys that inserted by this plugin every 6 hours!

>>> If #CW not found by plugin, a screen will be displayed that request the CW code of feed or any Biss Encrypted channel!

After pressing ok button, key will be inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically.

>>>when you type CW in box, lowercase or uppercase letters is not important.


>>>If anyone is finding that the keys aren't being deleted from the SoftCamKey file after 6 hrs, change the time setting on your stb from "transponder time" to "ntp".



:dish:>>>Some #CW keys of tv channels are existed, if you want to add your favorite Biss channels, please post full info of it in this thread.(minimum info: Full transponder and #CW)


:announcement1::announcement:Important Tip: In some Countries, user must use VPN to see #CW :announcement::announcement1:







Download

BissFeedAutoKey https://www.sendspace.com/file/czyf0q
 

Çevrimiçi istatistikler

Çevrimiçi üyeler
0
Çevrimiçi ziyaretçiler
21
Toplam ziyaretçiler
21

Çevrimiçi üyeler

Şu anda hiç çevrimiçi üye yok.

Forumu ziyaret eden üyeler [24Saat]

  1. 20 Temmuz 2019, 5:24 AM

    zdzichb

  2. 20 Temmuz 2019, 3:53 AM

    boss01

  3. 20 Temmuz 2019, 3:27 AM

    birali

  4. 20 Temmuz 2019, 2:37 AM

    Hunter

  5. 19 Temmuz 2019, 11:31 PM

    Seele

  6. 19 Temmuz 2019, 11:27 PM

    Vm@xMuR@T

  7. 19 Temmuz 2019, 11:20 PM

    star37

  8. 19 Temmuz 2019, 11:16 PM

    Ersin27

  9. 19 Temmuz 2019, 10:53 PM

    maraz444

  10. 19 Temmuz 2019, 10:52 PM

    osmanke

  11. 19 Temmuz 2019, 10:40 PM

    dostum3

  12. 19 Temmuz 2019, 9:28 PM

    Bacanak>>46

  13. 19 Temmuz 2019, 9:24 PM

    Networkmaster

  14. 19 Temmuz 2019, 9:21 PM

    tantan

  15. 19 Temmuz 2019, 8:55 PM

    ScOrPy

  16. 19 Temmuz 2019, 8:52 PM

    isagul

  17. 19 Temmuz 2019, 8:44 PM

    S@mur@y>>3

  18. 19 Temmuz 2019, 8:40 PM

    aycan54

  19. 19 Temmuz 2019, 8:36 PM

    milan66

  20. 19 Temmuz 2019, 8:34 PM

    CoLoMBo

  21. 19 Temmuz 2019, 8:21 PM

    DreAmMax

  22. 19 Temmuz 2019, 8:12 PM

    TatanKa>>2

  23. 19 Temmuz 2019, 8:07 PM

    reexx

  24. 19 Temmuz 2019, 8:05 PM

    islimyeli

  25. 19 Temmuz 2019, 8:01 PM

    kurtulus_07

  26. 19 Temmuz 2019, 8:01 PM

    CoSmicMax

  27. 19 Temmuz 2019, 7:53 PM

    juventinos68

  28. 19 Temmuz 2019, 7:43 PM

    kaptan3888

  29. 19 Temmuz 2019, 7:21 PM

    keskin

  30. 19 Temmuz 2019, 7:16 PM

    yozgul52

  31. 19 Temmuz 2019, 7:09 PM

    alterna

  32. 19 Temmuz 2019, 7:03 PM

    enigma>>46

  33. 19 Temmuz 2019, 7:03 PM

    rd192

  34. 19 Temmuz 2019, 6:52 PM

    schundo13

  35. 19 Temmuz 2019, 6:47 PM

    SAT elite

  36. 19 Temmuz 2019, 6:36 PM

    Mehmetkarahanlı

  37. 19 Temmuz 2019, 6:33 PM

    yubu

  38. 19 Temmuz 2019, 6:21 PM

    eerol

  39. 19 Temmuz 2019, 6:09 PM

    Sat_Lodge Jo

  40. 19 Temmuz 2019, 5:53 PM

    mamBa>>46

  41. 19 Temmuz 2019, 5:29 PM

    RasheDaD®

  42. 19 Temmuz 2019, 5:06 PM

    veliyıldırım

  43. 19 Temmuz 2019, 4:46 PM

    kral41

  44. 19 Temmuz 2019, 4:32 PM

    gunay

  45. 19 Temmuz 2019, 4:31 PM

    Krzychu

  46. 19 Temmuz 2019, 4:08 PM

    erdoesko

  47. 19 Temmuz 2019, 4:03 PM

    ecHoTecHNu

  48. 19 Temmuz 2019, 4:00 PM

    niyazi

  49. 19 Temmuz 2019, 3:38 PM

    şampiyon>>®

  50. 19 Temmuz 2019, 3:25 PM

    uyducu2010

General chit-chat
Yardım Kullanıcılar
    Vm@xMuR@T Vm@xMuR@T: kolay gelsin