Yeni mesajlar Yeni konular En çok mesaj En çok tepki En çok görüntülenen

En çok mesaj

❖❖E2 WeTeK ❖❖ E2 LibreELEC-Raspberry Pi 4.arm-9.2.1-Kodi 18.6

Myst_m@x.

Moderator
LibreELEC-Raspberry Pi 4.arm-9.2.1-Kodi 18.6
LibreELEC-Raspberry Pi 4.arm-9.2.1

Kodi 18.6 (Linux Kernel 4.19.x)







LibreELEC (Leia) 9.2.1


by CvH · Published March 10, 2020 · Updated March 28, 2020


LibreELEC 9.2.1 (Leia) the final version has arrived based upon Kodi v18.6, the 9.2.1
release contains many changes and refinements to user experience and a complete
overhaul of the underlying OS core to improve stability and extend hardware support
compared to the LE 9.0 release.


Changes since 9.2.0:


WireGuard support added to settings
improvements for the RPi4
serveral minor updates


Change for Raspberry 4:


With LE 9.1.002 and later you need to add “hdmi_enable_4kp60=1“ to your config.txt if
you want to use 4k output at the RPi4. Before you needed “hdmi_enable_4k=1“ that is
now deprecated.


Raspberry 4:


It would be nice to have the 4B running the latest mainline kernel as other devices in
LibreELEC 9.2, but adding support for an all-newSoC chipset is a huge effort and the Pi
Foundation needed to align initial 4B software with the current Raspbian release to
maximise compatibility with existing software and to keep the workload sensible.
Generic x86/64 devices are running Linux 5.1, while Raspberry Pi devices (0/1/2/3/4)
are using Linux 4.19 with some new/extra code.


In this initial release 1080p playback behaviour and performance on the 4B are broadly
on-par with the previous 3B/3B+ model, except for HEVC media which is now hardware
decoded and massively improved. New 4K video capabilities still have plenty of rough
edges to be smoothed out, but the Pi Foundation developers have been pushing fixes to
the test team at a phenomenal rate over the last month and that will continue as the
userbase expands.


The 4B now uses SPI flash for the bootloader. Current firmware supports SD card boot
only – Network and USB booting are still on the Pi Foundation to-do list. Also on the list
is HBR audio (current audio capabilities are the same as the 3B) and 3D video. The 4B
hardware is HDR capable, but software support has a dependency on the new Linux kernel
frameworks merged by Intel developers (with help from Team LibreELEC/Kodi) in Linux 5.2
and a kernel bump will be needed to use them. Once the initial excitement and activity from
the 4B launch calms down, serious work on HDR and transitioning Raspberry Pi over to the
new GBM/V4L2 video pipeline can start.


Rockchip:


Our Rockchip releases remain in an state with limited support. The Kodi version is updated
but there are no significant video/audio improvements to the Rockchip 4.4 kernel codebase – and
none planned. Our work on Rockchip support has refocussed onto the Linux 5.x kernel to use
the modern kernel frameworks needed for the next-generation Kodi video pipeline. This work
is progressing nicely, but it means the 4.4 codebase “is what it is” until a future kernel bump.


Amlogic


Our original goal was to announce Allwinner and Amlogic images alongside Rockchip as part of
the LibreELEC 9.2 release, but while overall readiness has greatly improved in recent
months – each has specific technical challenges to overcome before they meet our basic
critera for a public release. On the human side of the project several maintainers also have
reduced availability for support due to work and family commitments. Combining these factors
together, the team felt it was better to be patient and not rush releases.


So instead of releasing LibreELEC 9.2 stable images, we are announcing the start of official nightly
images from our master development branch.


If you experience problems, please open an thread at our forum. You can also open an ticket at
our issue tracker.


Upgrading


On first boot the Kodi media database will be upgraded. Depending on your hardware and media
collection size this could take several minutes. Please be patient.


@by CvH Thanks

@LibreELEC Team Thanks


İmajımızı zip veya rardan çıkartıp MSD Karta kart yazma programıyla yazıyoruz Burada DTB
(bcm2711-rpi-4-b.dtb) dosyası imajın içinde hazır geldiğinden hiç bir şey yapmamıza gerek yok
sistem kurulumda otomatik seçiyor imajı yazdırdığımız MSD Kartı cihazımızın alt kısmında
MSD kart girişine takıyoruz ve cihazımızı başlatıp aynı kodi kurulumu gibi yönergeleri kendimize
göre ayarlıyoruz ayrıca hangi eklentileri kurmak istiyorsak kurulumlarını yapıyoruz ve cihazımızı
medya cihazı olarak kullanmaya başlıyoruz.



MSD Kart Kullanımı Videolu anlatım

https://www.youtube.com/watch?v=6mxY...ature=youtu.be


Downloads


Direct link
https://libreelec.tv/raspberry-pi-4/


MSD Card
http://libreelec.reloumirrors.net/Li...m-9.2.1.img.gz


Manuel Update
http://libreelec.reloumirrors.net/Li....arm-9.2.1.tar


Nand
http://libreelec.reloumirrors.net/Li....2.1-noobs.tar


FTP giriş bilgileri kullanıcı: root şifresi: libreelec
 

Sohbet kullanıcıları

Çevrimiçi istatistikler

Çevrimiçi üyeler
9
Çevrimiçi ziyaretçiler
131
Toplam ziyaretçiler
140

Forum istatistikleri

Konular
15,876
Mesajlar
129,358
Üyeler
1,743
Son üye
mbatu

Forumu ziyaret eden üyeler [24Saat]

  1. 31 Mayıs 2020, 12:10 PM

    serik

  2. 31 Mayıs 2020, 12:06 PM

    veliyıldırım

  3. 31 Mayıs 2020, 12:04 PM

    Birali

  4. 31 Mayıs 2020, 12:04 PM

    juventinos68

  5. 31 Mayıs 2020, 11:59 AM

    ramadan güdücü

  6. 31 Mayıs 2020, 11:55 AM

    nyakec

  7. 31 Mayıs 2020, 11:48 AM

    A.C

  8. 31 Mayıs 2020, 11:43 AM

    tjhon

  9. 31 Mayıs 2020, 11:30 AM

    tnko321

  10. 31 Mayıs 2020, 11:30 AM

    drogbaba

  11. 31 Mayıs 2020, 11:29 AM

    ryuji

  12. 31 Mayıs 2020, 11:23 AM

    avcı48

  13. 31 Mayıs 2020, 11:16 AM

    enigma>>46

  14. 31 Mayıs 2020, 11:15 AM

    Mehmetkarahanlı

  15. 31 Mayıs 2020, 11:10 AM

    Haydar_1963

  16. 31 Mayıs 2020, 11:10 AM

    cavit63

  17. 31 Mayıs 2020, 10:45 AM

    cafi

  18. 31 Mayıs 2020, 10:43 AM

    Resultürk

  19. 31 Mayıs 2020, 10:01 AM

    keremoli

  20. 31 Mayıs 2020, 9:57 AM

    RamSeS>>2

  21. 31 Mayıs 2020, 9:56 AM

    sero58

  22. 31 Mayıs 2020, 12:14 PM

    oktay06

  23. 31 Mayıs 2020, 9:53 AM

    mevlutcelik69

  24. 31 Mayıs 2020, 9:46 AM

    Ersin27

  25. 31 Mayıs 2020, 9:37 AM

    osman6038

  26. 31 Mayıs 2020, 9:33 AM

    toyota22

  27. 31 Mayıs 2020, 9:29 AM

    emre

  28. 31 Mayıs 2020, 9:27 AM

    Timsah_xsat

  29. 31 Mayıs 2020, 9:24 AM

    sonsuzgfb

  30. 31 Mayıs 2020, 9:20 AM

    alfredop

  31. 31 Mayıs 2020, 9:07 AM

    regu10000

  32. 31 Mayıs 2020, 12:27 PM

    payam10

  33. 31 Mayıs 2020, 8:56 AM

    macmac

  34. 31 Mayıs 2020, 8:49 AM

    reexx

  35. 31 Mayıs 2020, 8:45 AM

    emu1980

  36. 31 Mayıs 2020, 8:44 AM

    Manager

  37. 31 Mayıs 2020, 8:40 AM

    erim1198

  38. 31 Mayıs 2020, 8:33 AM

    aaxiaoyu

  39. 31 Mayıs 2020, 7:56 AM

    selami05

  40. 31 Mayıs 2020, 7:34 AM

    TatanKa>>2

  41. 31 Mayıs 2020, 7:18 AM

    Memo®ist

  42. 31 Mayıs 2020, 7:06 AM

    tuccio

  43. 31 Mayıs 2020, 7:04 AM

    DreAm_M@x

  44. 31 Mayıs 2020, 6:45 AM

    duman

  45. 31 Mayıs 2020, 6:40 AM

    Bacanak>>46

  46. 31 Mayıs 2020, 6:40 AM

    isat

  47. 31 Mayıs 2020, 6:39 AM

    yubu

  48. 31 Mayıs 2020, 6:38 AM

    prove

  49. 31 Mayıs 2020, 6:35 AM

    **eskiya_46**

  50. 31 Mayıs 2020, 6:29 AM

    msonmez16

En çok sohbet edenler

Top