Neler yeni

Uydu Max Sat

Yeni mesajlar Yeni konular En çok cevaplanan En görüntülenen konu En çok begenilen

En çok mesaj
Kullanıcı
Mesaj

❖E2 WETEK/KODİ❖ E2 LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#41
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200110
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200110

Son Derleme Sürümü: 20200110
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

The new version of the LE images 20200110
*******************************************
Please note, now on the site I upload only one TAR file to update for the entire group of devices.
1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
full recovery of the standard firmware via the USB Burn Tool and the new activation of the
universal multi-boot, which is used in all new systems.

The new version of images 20191209. This version changes the DTB setting principle for
the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
have a problem not the correct color of the Kodi interface, you need to use the SD card to
write the image and additionally download and copy the file to the SD card (u-boot.ext).

https://yadi.sk/d/srrtn6kpnsKz2/Libr...U-BOOT-FIX-G12
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#42
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200113
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200113

Son Derleme Sürümü: 20200113
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

The new version of the LE images 20200113
*******************************************
Please note, now on the site I upload only one TAR file to update for the entire group of devices.
1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
full recovery of the standard firmware via the USB Burn Tool and the new activation of the
universal multi-boot, which is used in all new systems.

The new version of images 20191209. This version changes the DTB setting principle for
the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
have a problem not the correct color of the Kodi interface, you need to use the SD card to
write the image and additionally download and copy the file to the SD card (u-boot.ext).

https://yadi.sk/d/srrtn6kpnsKz2/Libr...U-BOOT-FIX-G12
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#43
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200114
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200114

Son Derleme Sürümü: 20200114
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

The new version of the LE images 20200114
*******************************************
Please note, now on the site I upload only one TAR file to update for the entire group of devices.
1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
full recovery of the standard firmware via the USB Burn Tool and the new activation of the
universal multi-boot, which is used in all new systems.

The new version of images 20191209. This version changes the DTB setting principle for
the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
have a problem not the correct color of the Kodi interface, you need to use the SD card to
write the image and additionally download and copy the file to the SD card (u-boot.ext).

https://yadi.sk/d/srrtn6kpnsKz2/Libr...U-BOOT-FIX-G12
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
Katılım
17 Ağustos 2018
Mesajlar
38,040
Beğeniler
1,867
Puanlar
113
Konum
Bursa
İnternet sitesi
www.uydumaxsat.com
#44
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200115
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200115

Son Derleme Sürümü: 20200115
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
Katılım
17 Ağustos 2018
Mesajlar
38,040
Beğeniler
1,867
Puanlar
113
Konum
Bursa
İnternet sitesi
www.uydumaxsat.com
#45
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200124
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200124

Son Derleme Sürümü: 20200124
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#47
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200130
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200130

Son Derleme Sürümü: 20200130
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
Katılım
17 Ağustos 2018
Mesajlar
38,040
Beğeniler
1,867
Puanlar
113
Konum
Bursa
İnternet sitesi
www.uydumaxsat.com
#48
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200201
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200201

Son Derleme Sürümü: 20200201
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#49
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200205
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200205

Son Derleme Sürümü: 20200205
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#50
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200206
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200206

Son Derleme Sürümü: 20200206
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#52
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200210
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200210

Son Derleme Sürümü: 20200210
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#53
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200210
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200210

Son Derleme Sürümü: 20200210
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
14 Ocak 2019
Mesajlar
664
Beğeniler
265
Puanlar
63
#55
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200213
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200213
https://yadi.sk/d/srrtn6kpnsKz2/Libr...200213-aarch64
Son Derleme Sürümü: 20200213
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar
Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar


1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 
Katılım
26 Ocak 2019
Mesajlar
1,233
Beğeniler
249
Puanlar
63
#56
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200214
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200214
https://yadi.sk/d/srrtn6kpnsKz2/Libr...200214-aarch64

Son Derleme Sürümü: 20200214
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar
Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar


1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.
 

Çevrimiçi istatistikler

Çevrimiçi üyeler
2
Çevrimiçi ziyaretçiler
43
Toplam ziyaretçiler
45

Çevrimiçi üyeler

Forumu ziyaret eden üyeler [24Saat]

  1. 17 Şubat 2020, 5:06 AM

    zagora57

  2. 17 Şubat 2020, 5:05 AM

    zdzichb

  3. 17 Şubat 2020, 4:14 AM

    cancano61

  4. 17 Şubat 2020, 4:02 AM

    ramadan güdücü

  5. 17 Şubat 2020, 6:13 AM

    Teoman

  6. 17 Şubat 2020, 2:12 AM

    LooD_m@x.

  7. 17 Şubat 2020, 1:22 AM

    cemo

  8. 17 Şubat 2020, 12:52 AM

    safre

  9. 17 Şubat 2020, 12:07 AM

    hajo8697

  10. 16 Şubat 2020, 11:30 PM

    duman

  11. 16 Şubat 2020, 11:29 PM

    seamir

  12. 16 Şubat 2020, 11:26 PM

    sami noor

  13. 16 Şubat 2020, 11:18 PM

    boss01

  14. 16 Şubat 2020, 11:00 PM

    serif70

  15. 16 Şubat 2020, 10:34 PM

    orion_bilo

  16. 16 Şubat 2020, 10:29 PM

    cafi

  17. 16 Şubat 2020, 10:26 PM

    Dreams@t.

  18. 16 Şubat 2020, 10:18 PM

    asderfor

  19. 16 Şubat 2020, 10:13 PM

    turan45

  20. 16 Şubat 2020, 10:13 PM

    Ersin27

  21. 16 Şubat 2020, 10:11 PM

    milan_66

  22. 16 Şubat 2020, 10:06 PM

    HypeR m@x

  23. 16 Şubat 2020, 10:02 PM

    almali

  24. 16 Şubat 2020, 9:47 PM

    Haydar_1963

  25. 16 Şubat 2020, 9:35 PM

    DreAmLoweR

  26. 16 Şubat 2020, 9:25 PM

    H@_s@N_55

  27. 16 Şubat 2020, 9:15 PM

    **eskiya_46**

  28. 16 Şubat 2020, 9:10 PM

    keremoli

  29. 16 Şubat 2020, 9:07 PM

    kemal atakan

  30. 16 Şubat 2020, 9:02 PM

    Alemci>>46

  31. 16 Şubat 2020, 8:59 PM

    yuksel123456

  32. 16 Şubat 2020, 8:55 PM

    CoSmicMax

  33. 16 Şubat 2020, 8:50 PM

    izet

  34. 16 Şubat 2020, 8:36 PM

    lazinho61

  35. 16 Şubat 2020, 8:36 PM

    sero58

  36. 16 Şubat 2020, 8:30 PM

    islimyeli

  37. 16 Şubat 2020, 8:12 PM

    cimen

  38. 16 Şubat 2020, 8:02 PM

    Hum@xel.

  39. 16 Şubat 2020, 7:59 PM

    bilgin19

  40. 16 Şubat 2020, 7:55 PM

    diner

  41. 16 Şubat 2020, 7:54 PM

    enigma>>46

  42. 16 Şubat 2020, 7:53 PM

    nrslblgn

  43. 16 Şubat 2020, 7:43 PM

    papo1

  44. 16 Şubat 2020, 7:41 PM

    GioppyGio_1

  45. 16 Şubat 2020, 7:34 PM

    mamBa>>46

  46. 16 Şubat 2020, 7:24 PM

    avcı48

  47. 16 Şubat 2020, 7:15 PM

    RasheDaD>®

  48. 16 Şubat 2020, 7:14 PM

    sahin_42

  49. 16 Şubat 2020, 7:12 PM

    macmac

  50. 16 Şubat 2020, 7:08 PM

    Obelix12

General chit-chat
Yardım Kullanıcılar
    Teoman Teoman: :hala;:tamam;:tamam;