Yeni mesajlar Yeni konular En çok mesaj En çok tepki En çok görüntülenen

En çok mesaj

❖E2 WETEK/KODİ❖ E2 LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150 ✅

Myst_m@x.

Moderator
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch 9.80-devel

LibreELEC-ARM-ALL.aarch 9.80-devel 20200605 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...5-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...bb45-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Dreams@t.

Co Admin
Yetkili üye
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200611 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Dreams@t.

Co Admin
Yetkili üye
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200615 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Myst_m@x.

Moderator
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch 9.80-devel

LibreELEC-ARM-ALL.aarch 9.80-devel 20200618 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...5f94-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200622 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200626 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Mehmetkarahanlı

Administrative
Yetkili üye
Administratör
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200629 Test İmage

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

Çevrimiçi yöneticiler

Çevrimiçi üyeler

Sohbet kullanıcıları

Çevrimiçi istatistikler

Çevrimiçi üyeler
3
Çevrimiçi ziyaretçiler
78
Toplam ziyaretçiler
81

Forum istatistikleri

Konular
16,189
Mesajlar
138,294
Üyeler
1,964
Son üye
Kamran4238

Forumu ziyaret eden üyeler [24Saat]

  1. 5 Temmuz 2020, 4:49 AM

    qLaDyaToR

  2. 5 Temmuz 2020, 4:06 AM

    floryn2005p

  3. 5 Temmuz 2020, 3:50 AM

    Birali

  4. 5 Temmuz 2020, 3:23 AM

    ba.6155

  5. 5 Temmuz 2020, 3:18 AM

    ivancha

  6. 5 Temmuz 2020, 3:10 AM

    edeibrahim

  7. 5 Temmuz 2020, 3:03 AM

    Dmx

  8. 5 Temmuz 2020, 3:02 AM

    juventinos68

  9. 5 Temmuz 2020, 2:29 AM

    boss01

  10. 5 Temmuz 2020, 4:40 AM

    vn5socks.net

  11. 5 Temmuz 2020, 4:13 AM

    Shopsocks5.com

  12. 5 Temmuz 2020, 1:17 AM

    aaxiaoyu

  13. 5 Temmuz 2020, 12:53 AM

    Ali_70

  14. 5 Temmuz 2020, 12:11 AM

    anka245

  15. 4 Temmuz 2020, 11:35 PM

    Mehmetkarahanlı

  16. 4 Temmuz 2020, 11:33 PM

    osmanke

  17. 4 Temmuz 2020, 11:24 PM

    TatanKa>>2

  18. 4 Temmuz 2020, 11:20 PM

    Kamran4238

  19. 4 Temmuz 2020, 11:00 PM

    LooD_m@x.

  20. 4 Temmuz 2020, 10:53 PM

    selami75

  21. 4 Temmuz 2020, 10:50 PM

    HypeR m@x

  22. 4 Temmuz 2020, 10:49 PM

    Marconizza

  23. 4 Temmuz 2020, 10:41 PM

    Kors@NZoRo

  24. 4 Temmuz 2020, 10:39 PM

    pino

  25. 4 Temmuz 2020, 10:35 PM

    asir

  26. 4 Temmuz 2020, 10:33 PM

    JoN@iD

  27. 4 Temmuz 2020, 10:29 PM

    Memo®ist

  28. 4 Temmuz 2020, 10:29 PM

    oko

  29. 4 Temmuz 2020, 10:27 PM

    Haydar_1963

  30. 4 Temmuz 2020, 10:15 PM

    DemBaBa

  31. 4 Temmuz 2020, 10:14 PM

    turan45

  32. 4 Temmuz 2020, 10:13 PM

    serif70

  33. 4 Temmuz 2020, 10:12 PM

    cimen

  34. 4 Temmuz 2020, 10:09 PM

    cagribey42

  35. 4 Temmuz 2020, 10:07 PM

    enigma>>46

  36. 4 Temmuz 2020, 10:07 PM

    zeid_max

  37. 4 Temmuz 2020, 9:43 PM

    Hum@xel.

  38. 4 Temmuz 2020, 9:39 PM

    hüseyin22

  39. 4 Temmuz 2020, 9:26 PM

    dessas

  40. 4 Temmuz 2020, 9:23 PM

    sansar

  41. 4 Temmuz 2020, 9:22 PM

    alfredop

  42. 4 Temmuz 2020, 9:11 PM

    tahmaz11

  43. 5 Temmuz 2020, 4:31 AM

    RamSeS>>2

  44. 4 Temmuz 2020, 9:06 PM

    kilicmuhsin

  45. 4 Temmuz 2020, 9:01 PM

    seamir

  46. 4 Temmuz 2020, 8:57 PM

    rahmi75

  47. 4 Temmuz 2020, 8:50 PM

    powerciSCo

  48. 4 Temmuz 2020, 8:43 PM

    Hbey65

  49. 4 Temmuz 2020, 8:36 PM

    zyhdi

  50. 4 Temmuz 2020, 8:28 PM

    Morpheus884

  51. 4 Temmuz 2020, 8:27 PM

    eerol

  52. 4 Temmuz 2020, 8:21 PM

    Lululla Joy

  53. 4 Temmuz 2020, 8:12 PM

    Resultürk

  54. 4 Temmuz 2020, 8:10 PM

    William_1

  55. 4 Temmuz 2020, 8:09 PM

    papo1

  56. 4 Temmuz 2020, 8:03 PM

    mamBa>>46

  57. 4 Temmuz 2020, 7:55 PM

    ryuji

  58. 4 Temmuz 2020, 7:51 PM

    SkyBox_s@t.

  59. 4 Temmuz 2020, 7:36 PM

    msonmez16

  60. 4 Temmuz 2020, 7:26 PM

    ginasmall

En çok sohbet edenler

Top